PVC Ca Zn Stabilizer
-
PVC Ca Zn Stabilizer JCS-15G
● JCS-15G is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in SPC.
● It provides good heat stability, excellent initial color and color stability, good consistency and long-term processing. Under proper processing parameters, JCS-15G would exhibit improving plate-out performance.
● Dosage: 2.0 – 2.2phr (per 25phr PVC resin) is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.
-
PVC Ca Zn Stabilizer JCS-64
● JCS-64 is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in WPC.
● It provides good heat stability, excellent initial color and color stability. Under proper processing parameters, JCS-64 would exhibit improving plate-out performance.
● Dosage: 3.2 - 4.5 phr is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.
-
PVC Ca Zn Stabilizer JCS-86
● JCS-86 is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in WPC.
● It provides good heat stability. Under proper processing parameters, JCS-86 would exhibit improving plate-out performance.
● Dosage: 0.8 - 1.125 phr (per 25phr PVC resin) is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.
-
PVC Ca Zn Stabilizer JCS-422
● JCS-422 is a non-toxic one pack stabilizer/lubricant system which is designed for injection processing. It is suggested to be used in PVC PIPE FITTING.
● Under proper processing parameters, JCS-422 provides good heat stability, excellent initial color and color stability.
● Dosage: 4.0 – 4.5phr is recommended depending on the formula and machine operating conditions.
-
PVC Ca Zn Stabilizer JCS-420
● JCS-420 is a non-toxic one pack stabilizer/lubricant system which is designed for injection processing. It is suggested to be used in PVC PIPE FITTING.
● Under proper processing parameters, JCS-420 provides good heat stability, excellent initial color and color stability.
● Dosage: 4.0 – 4.5phr is recommended depending on the formula and machine operating conditions.
-
PVC Ca Zn Stabilizer TEQ-006
● TEQ-006 is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in PRESSURE or NON-PRESSURE UPVC PIPE.
● It provides good heat stability, excellent initial color and color stability. Under proper processing parameters, TEQ-006 would exhibit improving plate-out performance.
● Dosage: 2.8 – 3.2phr is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.
-
PVC Ca Zn Stabilizer JCS-LQF1
● JCS-LQF1 is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in FOAMBOARD.
● It provides good heat stability, excellent initial color and color stability. Under proper processing parameters, JCS-LQF1 would exhibit improving plate-out performance.
● Dosage: 1.0 – 1.225phr (per 25phr PVC resin) is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.
-
PVC Ca Zn Stabilizer JCS-JPW-6
● JCS-JPW-6 is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in PVC WHITE PROFILE.
● It provides good heat stability, excellent initial color and color stability, good weather resistance. Under proper processing parameters, JCS-JPW-6 would exhibit improving plate-out performance.
● Dosage: 4.0 - 4.5phr is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.
-
PVC Ca Zn Stabilizer TEQ-007
● TEQ-007 is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in PRESSURE or NON-PRESSURE UPVC PIPE.
● It provides good heat stability and color stability. Under proper processing parameters, TEQ-007 would exhibit improving plate-out performance.
● Dosage: 2.8 – 3.2phr is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.
-
PVC Ca Zn Stabilizer JCS-21FQ
● JCS-21FQ is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in FOAMBOARD.● It provides good heat stability, excellent initial color and color stability. Under proper processing parameters, JCS-21FQ would exhibit improving plate-out performance.● Dosage: 0.8 – 1.125phr (per 25phr PVC resin) is recommended depending on the formula andmachine operating conditions. Mixing temperature between 110℃ – 130℃ is recommended. -
PVC Ca Zn Stabilizer JCS-13
● JCS-13 is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in SPC.
● It provides good heat stability, excellent initial color and color stability. Under proper processing parameters, JCS-13 would exhibit improving plate-out performance.
● Dosage: 1.65 – 1.85 phr is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.
-
PVC Ca Zn Stabilizer JCS-220
● JCS-220 is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in FOAMBOARD.
● It provides good heat stability, excellent initial color and color stability. Under proper processing parameters, JCS-220 would exhibit improving plate-out performance.
● Dosage: 0.9 – 1.1phr (per 25phr PVC resin) is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.
