For Foamboard

  • PVC Ca Zn Stabilizer  JCS-LQF1

    PVC Ca Zn Stabilizer JCS-LQF1

    ● JCS-LQF1 is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in FOAMBOARD.

    ● It provides good heat stability, excellent initial color and color stability. Under proper processing parameters, JCS-LQF1 would exhibit improving plate-out performance.

    ● Dosage: 1.0 – 1.225phr (per 25phr PVC resin) is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.

  • PVC Ca Zn Stabilizer JCS-21FQ

    PVC Ca Zn Stabilizer JCS-21FQ

    ● JCS-21FQ is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in FOAMBOARD.
    ● It provides good heat stability, excellent initial color and color stability. Under proper processing parameters, JCS-21FQ would exhibit improving plate-out performance.
    ● Dosage: 0.8 – 1.125phr (per 25phr PVC resin) is recommended depending on the formula and
    machine operating conditions. Mixing temperature between 110℃ – 130℃ is recommended.
  • PVC Ca Zn Stabilizer  JCS-220

    PVC Ca Zn Stabilizer JCS-220

    ● JCS-220 is a non-toxic one pack stabilizer/lubricant system which is designed for extrusion processing. It is suggested to be used in FOAMBOARD.

    ● It provides good heat stability, excellent initial color and color stability. Under proper processing parameters, JCS-220 would exhibit improving plate-out performance.

    ● Dosage: 0.9 – 1.1phr (per 25phr PVC resin) is recommended depending on the formula and machine operating conditions. Mixing temperature between 110℃ - 130℃ is recommended.